Tags: deformable mirror, adaptive optics, boston micromachines, product information, response time, segmented, SLM, spatial light modulator, mirror technology, BMC, speed, Reflectivity
Before Deformable Mirrors became popular in the Adaptive Optics industry, consumers would generally turn to liquid crystal-based device (LCOS) spatial light modulators to confront their challenges. Here at BMC, we regularly receive questions on how all deformable mirrors, in addition to our MicroElectroMechanical (MEMS) deformable mirrors, compare to LCOS devices. Below I have touched upon some of the top differences between the two devices that I believe should play an important factor in one’s decision to purchase a wavefront shaping device.
1) LCOS devices are only available in a segmented architecture, where MEMS DMs offer both continuous and segmented styles in various styles and options. Although both layouts have their own advantages, most researchers favor the continuous model. Due to discontinuities between the actuators, it prevents any sharp edges within the image, making it well suited for imaging applications. Claire Max at UC Santa Cruz has explained and presented calculations on how you can achieve higher level of correction capability with a continuous mirror. Check out slide 47, which goes over her calculations here.
2) With MEMS DMs, we are able to offer strokes up to 5.5um (1.5um, 3.5um and 5.5um available), while LCOS SLMs are generally limited to only a stroke of 2PI in the visible region. This can be a major inconvenience for certain applications with higher amplitude aberrations.
3) The response time of our devices have always been much faster than any liquid crystal device on the market, while recent updates to our product line achieve even FASTER rates than before. Our devices can operate up to 60 kHz with our new high speed Kilo-S Driver or our Low-Latency Driver, whereas LCOS devices are limited to only a few hundred Hertz at best.
4) For the most part, LCOS devices are transmission based, causing light to be absorbed by the medium and resulting in lost light. There have been reflective devices introduced recently, however, they tend to scatter large amounts of light due to the small segment sizes. With a MEMS device, our segmented mirrors are over 98% reflective and our continuous mirrors are greater than 99%. Of course, this is the case only with the appropriate coating for the wavelength at which you are operating.
If you're interested in learning more about the differences between MEMS DMs and LCOS devices or the differences between any other mirrors currently on the market, please feel free to contact us here.
Tags: deformable mirror, adaptive optics, boston micromachines, UAV, free-space communication, modulating retroreflector, pulse, pulse width, laser beam, CLEO, laser science, biological imaging, deep tissue microscopy, BMC, laser pulse shaping, ultrafast lasers, two photon, optical chopper, optical modulator, chopper, AOM, acousto-optic modulator, speed, shutter
It's been a few weeks since we returned from the Conference on Lasers and Electro-Optics 2013 and now that we're settled back in to the daily routine, I thought I would give some highlights on the show. I was happy to be joined this time by our new Marketing and Communications Specialist, Angelica Perrone, who did a great job navigating the complex photonics market for the first time.
While the conference seems to be chugging along at a nice pace, the tradeshow has most definitely become a smaller venue. We were once again hosted by our strategic partner, Thorlabs (thanks, again guys!) and being in such a central location on the floor, we were able to get a good flavor for the pace of the show. Here are my thoughts:
Little, different, yellow, better
Anybody get that Nuprin reference? Anybody? See what I 'm talking about here.
Okay, so it's not yellow (although yellow lasers are cool), but the show is definitely getting smaller. I mentioned to a colleague that since the show is in San Jose for the second year in the row, it seemed like the barriers on either end of the tradeshow floor had moved in just a bit.
As far as different, the show is not like other photonics shows in that it is pretty focused in its applications. While there were some interesting talks on microscopy, this was a small portion of the material, with most others focussing on more laser-centric applications, as the title of the conference implies.
As far as better, I would say that for BMC, it was most definitely better for our new products: The Reflective Optical Chopper(ROC) and the Linear Array DM. We recieved more interest in these products over our legacy deformable mirror technologies. This is exciting for me as a product marketer and salesperson and even moreso as a member of a company that is always looking for new avenues for our technology. We see the ROC being useful for users who span from pure laser scientists to imaging engineers interested in chopping a beam at high speed with either a constant or variable duty cycle. The linear array has already proven useful in pulse shaping applications as described in our whitepaper, which is available for download here. Both products are available for purchase now.
Our Wavefront Sensorless Adaptive Optics Demonstrator for Beam Shaping (WSAOD-B)also generated some buzz. More and more applications which require wavefront correction are surfacing and need a solution without a wavefront sensor.
In all, it was a good show that has given me and my team work to do as we explore more exotic applications for our technology. I look forward to joining the show again next year and I hope to connect with all of you again in the near future!
For more information on the products mentioned above, please visit our website and download our whitepapers.
Tags: adaptive optics, boston micromachines, product information, response time, free-space communication, modulating retroreflector, pulse, CLEO, BMC, ultrafast lasers, optical chopper, optical modulator, chopper, AOM, acousto-optic modulator, SNR, signal-to-noise, speed, shutter
As Boston Micromachines' newest member, I would first and foremost like to introduce myself. My name is Angelica and I have joined the BMC team as their Marketing and Communications Associate. It has been some time now since our last blog and I thought it would be appropriate to discuss our most recent product; The Reflective Optical Chopper, or ROC.
Optical Choppers, being frequently used for signal recovery in improving signal-to-noise ratio, are used to convert a continuous laser beam into a chopped one. Traditional Optical Choppers offer various pains, such as the need to alter the beam size to fit through wheel spokes, challenging stability at low speeds, the need for costly lock-in amplifier equipment and complex calibration procedures. The innovative, low-cost ROC simply eliminates all of these, outperforming traditional optical choppers.
Drive electronics are paired with BMC’s MEMS Optical Modulator technology to create the ROC. The ROC provides beam chopping at impressive speeds without beam size modification. With a frequency range of DC to 150 kHz with better than 40 µs response time, control increments of .01 Hz and a contrast ratio exceeding 90% up to 100 kHz, the value of the ROC ‘speaks’ for itself. For signal-to-noise ratio improvement, the drive signal can be used as the sync signal, allowing it to be painlessly synchronized.
Many industrial, scientific, medical, aerospace and military applications call for the need of reliable and advanced equipment. The ROC has superior capabilities such as high speed, large frequency range, reliability, stability and usefulness in SNR improvement applications. Basically, the Reflective Optical Chopper is an advance in optical chopping technology which is available at a low price.